Sheet Metal Worker Apprenticeship

Campus Kelowna
Delivery Full-Time
Credential Apprenticeship
Notes

Level 1: 8 weeks
Level 2: 8 weeks
Level 3: 6 weeks
Level 4: 6 weeks

Share this program

  Email   Print
Sheet metal student uses machinery to bind two metals together in a cone shape


Apprenticeship Description

Sheet Metal Workers lay out, fabricate, assemble, weld, install and service the following: ducting, spouting, fittings cabinets, gutters, copings, flashings, supporting devices, wall systems, building envelope, ornamental work and integral equipment associated with the blowpipe, air pollution, heating, ventilating, air-conditioning, roofing, restaurant, kitchen, marine installations and hospital equipment.

Tuition and Fees

Tuition and fees depend on the level of apprenticeship study.

Program Details

Program outline:
  • introduction to trade terminology
  • layout and pattern development
  • shop work
  • materials and equipment
  • mathematics
  • safety
  • welding
  • field installation
  • supervision skills and responsibilities
Tuition and fees for Level 1:
  • Tuition only: $914.96
  • Ancillary fees - College: $96.92
  • Ancillary fees - student association: $32.72
  • Health and dental: not applicable
  • Total: $1,044.60
Textbooks for Level 1:
  • Sheet Metal, 2nd Edition: $113.99
  • Okanagan College 1st Year Sheet Metal Modules:  $60.79
  • Drafting Set: TBA

Note: 5% GST is not included in the price, and prices are subject to change. Textbooks are available at the OC Bookstore by calling 250-762-5445, ext. 4586, or ordering online

Required supplies:
  • Drafting Kit
  • CSA Approved Work Boots (Steel Toed)
  • Safety Glasses
  • Work Gloves
  • Binder
  • Pencils, Pens, Erasers
  • One of the following: Texas Instruments TI-30XA calculator to write IP Exam
  • Government issued Picture ID is required to write the Provincial and National Exams–driver’s license, photo ID, or valid passport. Student card is not acceptable
Program outline:
  • layout and pattern development
  • shop work
  • mathematics
  • field installation
  • architectural sheet metal
  • blueprint reading
  • welding
  • supervision skill and responsibilities
Tuition and fees for Level 2:
  • Tuition only: $686.22
  • Ancillary fees - College: $78.54
  • Ancillary fees - student association: $24.54
  • Health and dental: not applicable
  • Total: $789.30
Textbooks for Level 2:
  • Sheet Metal, 2nd Edition (if not already purchased):  $113.99
  • Okanagan College 1st Year Sheet Metal Modules (if not already purchased):  $56.99
  • Sheet Metal Apprentice Level 2 Modules:  $99.49
  • Ventilation Guidelines Manuals (Speak with Instructor prior to buying) $82.00
  • Drafting Set: TBA

Note: 5% GST is not included in the price, and prices are subject to change. Textbooks are available at the OC Bookstore by calling 250-762-5445, ext. 4586, or ordering online

Required supplies:
  • Drafting Kit
  • CSA Approved
  • Work Boots (Steel Toed)
  • Work Gloves
  • Safety Glasses
  • Binder
  • Pencils, Pens, Erasers
  • One of the following: Texas Instruments TI - 30XA calculator to write IP Exam
  • Government issued Picture ID is required to write the Provincial and National Exams - driver’s license, photo ID, or valid passport. Student card is not acceptable
Program outline:
  • layout and pattern development
  • shop work
  • materials and equipment
  • mathematics
  • service work
  • field installation
  • blueprint reading
  • residential heating and air conditioning
  • blowpipe
  • food service, stainless steel equipment
  • welding
  • supervision skills and responsibilities
Tuition and fees for Level 3:
  • Tuition only: $686.22
  • Ancillary fees - College: $78.54
  • Ancillary fees - student association: $24.54
  • Health and dental: not applicable
  • Total: $789.30
Textbooks and supplies for Level 3:
  • Sheet Metal, 2nd Edition (if not already purchased): $113.99
  • Okanagan College 1st Year Sheet Metal Modules (if not already purchased): $56.99
  • Sheet Metal Apprentice Level 2 Modules (if not already purchased): $99.49
  • Ventilation Guidelines Manuals (if not already purchased): $82.00
  • Drafting set: TBA

Note: 5% GST is not included in the price, and prices are subject to change. Textbooks are available at the OC Bookstore by calling 250-762-5445, ext. 4586, or ordering online

Required supplies:
  • Drafting Kit
  • CSA Approved
  • Work Boots (Steel Toed)
  • Work Gloves
  • Safety Glasses
  • Binder
  • Pencils, Pens, Erasers
  • One of the following: Texas Instruments TI - 30XA calculator to write IP Exam
  • Government issued Picture ID is required to write the Provincial and National Exams - driver’s license, photo ID, or valid passport. Student card is not acceptable
Program outline:
  • layout and pattern development
  • shop work
  • materials and equipment
  • mathematics
  • service work
  • field installation
  • supervision skills and responsibilities
  • blueprint reading
  • residential heating and air conditioning
  • blowpipe
  • duct system sound attenuation
Tuition and fees for Level 4:
  • Tuition only: $686.22
  • Ancillary fees - College: $78.54
  • Ancillary fees - student association: $24.54
  • Health and dental: not applicable
  • Total: $789.30
Textbooks for Level 4:
  • Sheet Metal, 2nd Edition (if not already purchased): $113.99
  • Okanagan College 1st Year Sheet Metal Modules (if not already purchased): $56.99
  • Sheet Metal Apprentice Level 2 Modules (if not already purchased): $99.49
  • Ventilation Guidelines Manuals (if not already purchased): $82.00
  • Drafting set: TBA
Required supplies:
  • Drafting Kit
  • CSA Approved
  • Work Boots (Steel Toed)
  • Work Gloves
  • Safety Glasses
  • Binder
  • Pencils, Pens, Erasers
  • One of the following: Texas Instruments TI - 30XA calculator to write IP Exam
  • Government issued Picture ID is required to write the Provincial and National Exams - driver’s license, photo ID, or valid passport. Student card is not acceptable
SheetMetalWorker

 

Admission Requirements

  • Registered as an apprentice with ITA BC.
  • Must be working for an employer with at least one qualified journeyperson. 
  • Not registered as an apprentice? Ask your employer to register you as an apprentice with the Industry Training Authority (ITA). It’s free, simple, and can be completed within a few minutes online or printed and mailed to the ITA Head Office. More details can be found at www.itabc.ca

 

Financial Incentives

The Apprenticeship Incentive Grant provides direct support to apprentices in the first two years of an approved apprenticeship training program (Red Seal trades). The taxable grant is $1,000 for Level 1 and $1,000 for Level 2. This grant is only available after you have completed the specified level of technical training and have a specific number of work-based hours on your ITA transcript.

The Apprenticeship Completion Grant is a $3,000 taxable cash grant for apprentices who complete their apprenticeship training and obtain Red Seal endorsement or a provincial/territorial certificate of qualification in a designated Red Seal trade. Apprentices can apply twice; once after their first year of training, and one more time after their second year.

Note: this grant is not available to students in the Professional Cook and/or Baker Apprenticeship programs.

The Apprenticeship Completion Grant is a $2,000 taxable cash grant for apprentices who complete their apprenticeship training and obtain Red Seal endorsement or a provincial/territorial certificate of qualification in a designated Red Seal trade.

WorkBC Apprenticeship Supports

Apprentice financial supports are available to eligible apprentices while they’re completing their classroom apprenticeship training. Apprentices may be able for supports which cover costs such as child card, transportation, disability, and more. Once an apprentice completes the WorkBC application online, a 16-digit reference code will be emailed to them. Use the 16-digit reference code for the Service Canada EI application. 

Service Canada EI Application

Apprentices attending full-time technical training (sometimes referred to as block-release training), they may be eligible to receive Employment Insurance (EI) benefits while unemployed and attending your course. Refer to the Service Canada website for application details.

Apprentices registered in a Red Seal trade apprenticeship program who meet the eligibility requirements may receive up to $4,000 in loans per period of technical training. The purpose of the CAL is to provide apprentices registered in Red Seal trades with loans to assist with the costs to attend technical training.

The LNG Canada Trades Training Fund is available for application by employers on behalf of their apprentices who are high-demand trades. Funding can be requested for apprenticeship training, foundation training as well as specialized, technical and managerial training. Only small companies with 20 employees or less, who are supporting apprenticeship in the demand trades, are eligible.

The federal government will now provide tax recognition for the costs that many employed tradespeople incur to provide their own tools in their employment duties. A deduction (up to a maximum of $500/year) will be allowed for the total cost of new tools acquired by an employed tradesperson in a tax year in excess of $1000. Employer will need to certify that the employee is required to obtain those tools for use in employment activities.

Apprentices who complete their third and four year of any apprenticeship program may be eligible for a tax credit. The apprentice will receive the tax credit when they file their annual income taxes. Apprentices will be eligible for a tax credit of $2,000 for completing Level 3 and a credit for $2,500 for completing Level 4 of any apprenticeship. For more information visit www.sbr.gov.bc.ca

Your T2202A tax form is available online via myOkanagan on the last day of February.
To access your tax form:

  1. Login to myOkanagan
  2. Username: 300XXXXXX@stu.oc
  3. Password: birthdate (mmddyyyy) (you will be asked to update your password the first time you login)
  4. Click the "T2202A Tax Form" link under Online Services

If you have any problems accessing your myOkanagan account, please call IT Services at 1-866-839-4032 or complete an online myOkanagan password reset request.

 

 

Additional Information

Learn more about the Department
View the Tuition and Fees page

 

 

Ask

Have your questions answered by a Trades and Apprenticeship staff member.

Register

Register with the ITA prior to applying to an apprenticeship program.

Apply

Take the next step and enrol in an apprenticeship program at OC.